Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Needing air filter part number
12-11-2007, 11:20
Post: #1
Needing air filter part number
I am looking for the part number for an air filter for an 1982 FCFB35
that has a CAT 3208NA engine. The filter measures 9 1/4 in dia. and
8 1/8 tall with fins. I looked it up under the files section on this
site, but those numbers are not right. Any help would be appreciated.

Thanks,

Wendel, Georgia
82FCFB35
Quote this message in a reply
12-11-2007, 15:40
Post: #2
Needing air filter part number
Wendel,
If you have the old air filter pull it out and take it to NAPA or just
about any diesel repair shop, they can match it up. Problem with most
part numbers on air filters every few years the manufactor changes the
number and at times cross references do not match up. You could also
check with other parts houses because air & oil filters are made by the
small company at times but put in a different vendors box.
John 88FC35

part --- In WanderlodgeForum@yahoogroups.com, "akav8r"
wrote:
>
> I am looking for the part number for an air filter for an 1982 FCFB35
> that has a CAT 3208NA engine. The filter measures 9 1/4 in dia.
and
> 8 1/8 tall with fins. I looked it up under the files section on this
> site, but those numbers are not right. Any help would be appreciated.
>
> Thanks,
>
> Wendel, Georgia
> 82FCFB35
>
Quote this message in a reply
12-11-2007, 16:14
Post: #3
Needing air filter part number
Wendel,

My database comes up with the following NAPA number for my air filter:

2914-1290INI

I don't have my bus at home, but your dimensions sound right.

Donn
'76 FC 33
South Kingstown, RI

________________________________________
From: WanderlodgeForum@yahoogroups.com
[mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of akav8r
Sent: Tuesday, December 11, 2007 6:20 PM
To: WanderlodgeForum@yahoogroups.com
Subject: [WanderlodgeForum] Needing air filter part number

I am looking for the part number for an air filter for an 1982 FCFB35
that has a CAT 3208NA engine. The filter measures 9 1/4 in dia. and
8 1/8 tall with fins. I looked it up under the files section on this
site, but those numbers are not right. Any help would be appreciated.

Thanks,

Wendel, Georgia
82FCFB35
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)