Electrical gremlin

[Ralph L. Fullenwider]

Hello Wes and welcome to the Forum.

Would it be possible, since we all need or could need, a little GenCon 101
here, to post the sequence of operation for that circuit?

Reason being, if we know the sequence on how it is designed to work
properly then it gives us a solid foundation in which to start the trouble
shooting procedure. Also we have a files section on this Forum that would
gladly accept a schematic of the circuitry to hand in had with the sequence
of operation. Having that knowledge on hand will un doubtingly get someone
from being stranded on the side of the road somewhere, etal: as an example.

Many thanks for any light you can put on this subject.

Safe travels,

Ralph and Charolette Fullenwider
Ralph's RV Solutions, Duncan, Oklahoma
http://home.swbell.net/rlf47/index.htm

At 04:27 PM 4/21/2006 +0000, you wrote:
>David, I received a call this morning from John Suter. He wanted to
>get some clarification on the operation of our GenCon generator
>controller. To make a long story short, he recommended that I visit
>this form and take a look around. Having done that, I was surprised to
>see that you are continuing to have trouble with your GenCon. I want
>to extend an invitation to any GenCon owner to either email, call or
>post a message in this forum when you have a GenCon problem and we'll
>do our best to address it.
>
>Thanks John, for pointing me to this forum.
>
>Wes Westhaver
>Westhaver Associates, Inc.
>