Electrical gremlin

[David Brady]

Thanks Wes, for your offer. I'm in the process of trying to understand
my symptoms a bit which takes time and use. I'm now at a campground
with the "gen auto switch" enabled and the brown-out set to ignore the
lower 60V ac, with the radioshack ac adapter unplugged, and with
shore power connected.

What I'm doing is forcing the gencon to only sense the coach dc voltage
level.
I'll run it like this for a day or so to see if the generator starts; so
far so good.
Thanks again for the offer to help diagnose my possible issues; first I need
to collect some data.

One thing that would be very useful from the gencon would be a display
of the reason for the last generator start; i.e., AC brown-out or low DC.

The display could be a small led readout on the board itself. As it is
today,
it's sometimes a bit of a mystery understanding the rationale behind a
generator start.

Best regards,
David Brady
'02 LXi, Smokey
Va

lwesthaver1958 wrote:
> David, I received a call this morning from John Suter. He wanted to
> get some clarification on the operation of our GenCon generator
> controller. To make a long story short, he recommended that I visit
> this form and take a look around. Having done that, I was surprised to
> see that you are continuing to have trouble with your GenCon. I want
> to extend an invitation to any GenCon owner to either email, call or
> post a message in this forum when you have a GenCon problem and we'll
> do our best to address it.
>
>
>
>
>
>
>