back up camera solenoid or relay or ???

[Ralph L. Fullenwider]

Jay:

That relay is in the chassis of the CT-911 and was part of the modification
by PMMI. There is a white plug on the back side of the chassis that has 5
wires and more than likely that is where your problem may be.

Ralph
Safe travels,

Ralph and Charolette Fullenwider
Ralph's RV Solutions, Duncan, Oklahoma
http://home.swbell.net/rlf47/index.htm

At 02:07 AM 5/8/2006 +0000, you wrote:
>My back-up camera works most of the time. When it doesn't work I get
>a blue vertical line on a blank screen. Most of the time, simply
>turning off the TV and waiting a few minutes then back on, it works.
>
>Occasionally it doesn't come back on. Have to turn off the ignition
>switch and when itd turned back on, the backup camera works again.
>
>My conclusion to this... the relay or solenoid that causes the TV to
>show a TV show when key is off and to show the back-up camera when
>the key is on,.... is bad.
>
>I want to replace this relay or solenoid. Have looked in the over
>head above the driver. I have not found the relay or solenoid yet.
>
>Anybody KNOW where the solenoid or relay IS? If its a weird piece,
>where do I get it? What part number is it?
>
>Thanks in advance!,
>Jay Darst
>85PT40
>