FC 3208 Fan Bracket Plate

[randydupree2000]

--- In WanderlodgeForum@yahoogroups.com, "dthollis1961"
wrote:
>
> My recently acquired 84 FC35 has had 2 Horton Air Fans and 2
radiators
> in as many years (not on my dime). There are no plates (spacers)
> between the bolt heads and the fan bracket where the fan bolts to
the
> front of the engine and I would like to get some of these plates and
> install them. Can anyone recall if these plates are simply flat
stock
> with 2 holes in them or is there more to them?
>
> Thanks
>
> David Hollis 84 FC35 Springfield,IL
>
as mike said,3/16 steel flatbar will work well,but when you drill the
holes they need to be offset just a bit to the side,or you may have to
grind a bevel on one side,the side that goes toward the bearing
casting,you have to make damn sure the flatbar is flat against the
casting when the bolts are tight.
randy