FC 3208 Fan Bracket Plate

[dthollis1961]

Thanks, Randy and Mike.

David Hollis


--- In WanderlodgeForum@yahoogroups.com, "randydupree2000"
wrote:
>
> --- In WanderlodgeForum@yahoogroups.com, "dthollis1961"

> wrote:
> >
> > My recently acquired 84 FC35 has had 2 Horton Air Fans and 2
> radiators
> > in as many years (not on my dime). There are no plates
(spacers)
> > between the bolt heads and the fan bracket where the fan bolts
to
> the
> > front of the engine and I would like to get some of these plates
and
> > install them. Can anyone recall if these plates are simply flat
> stock
> > with 2 holes in them or is there more to them?
> >
> > Thanks
> >
> > David Hollis 84 FC35 Springfield,IL
> >
> as mike said,3/16 steel flatbar will work well,but when you drill
the
> holes they need to be offset just a bit to the side,or you may
have to
> grind a bevel on one side,the side that goes toward the bearing
> casting,you have to make damn sure the flatbar is flat against the
> casting when the bolts are tight.
> randy
>