Over heating -- followup and question
|
09-10-2006, 08:56
Post: #9
|
|||
|
|||
Over heating -- followup and question
Pete:
Did the service shop paint your new radiator? Is it copper or aluminum? I have often wondered if painting the exterior fins reduces cooling capacity. Leroy Eckert 1990 WB-40 Niceville, FL ----- Original Message ----- From: Pete Masterson To: WanderlodgeForum@yahoogroups.com Sent: Friday, September 08, 2006 6:33 PM Subject: Re: [WanderlodgeForum] Over heating -- followup and question Leroy, The breather on the Series 60 is a single tube ... it appears to be rubber (and may be lengthened and/or easily re-routed). Things were a bit hot so I'll take a look at the engine tomorrow after everything has cooled down. Pete Masterson aeonix1@... '95 Bluebird Wanderlodge WBDA 42' El Sobrante, CA On Sep 8, 2006, at 4:02 PM, Leroy Eckert wrote: > Pete: > I think you said you have a Series 60. I'm not familar with the > breather tube set upon the Series 60. For info, my 8v92 has two > rubber tubes ( slobber tubes) which hang down to about 1" off the > highway. They do not drop oil but if they did it would fall on the > highway. Could you run the same set up? > > Leroy Eckert > 1990 WB-40 > Niceville, FL > [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Over heating -- followup and question - krminyl@... - 09-08-2006, 06:35
Over heating -- followup and question - Pete Masterson - 09-08-2006, 10:12
Over heating -- followup and question - Leroy Eckert - 09-08-2006, 11:02
Over heating -- followup and question - Jerry - 09-08-2006, 11:06
Over heating -- followup and question - Pete Masterson - 09-08-2006, 11:33
Over heating -- followup and question - Pete Masterson - 09-08-2006, 12:20
Over heating -- followup and question - Mike Hohnstein - 09-08-2006, 12:46
Over heating -- followup and question - Tom Warner - 09-08-2006, 12:56
Over heating -- followup and question - Leroy Eckert - 09-10-2006 08:56
Over heating -- followup and question - Pete Masterson - 09-10-2006, 09:07
Over heating -- followup and question - David Brady - 09-10-2006, 10:26
Over heating -- followup and question - Leroy Eckert - 09-10-2006, 11:41
Over heating -- followup and question - Rob Robinson - 09-10-2006, 12:29
Over heating -- followup and question - David Brady - 09-10-2006, 12:33
Over heating -- followup and question - Mike Hohnstein - 09-10-2006, 12:40
Over heating -- followup and question - Curt Sprenger - 09-10-2006, 12:51
Over heating -- followup and question - Leroy Eckert - 09-10-2006, 12:54
Over heating -- followup and question - Leroy Eckert - 09-10-2006, 13:07
Over heating -- followup and question - Leroy Eckert - 09-10-2006, 13:13
Over heating -- followup and question - Pete Masterson - 09-10-2006, 13:24
Over heating -- followup and question - Leroy Eckert - 09-10-2006, 13:31
Over heating -- followup and question - Mike Hohnstein - 09-10-2006, 13:34
Over heating -- followup and question - Leroy Eckert - 09-10-2006, 14:33
Over heating -- followup and question - Curt Sprenger - 09-10-2006, 14:46
Over heating -- followup and question - Leroy Eckert - 09-10-2006, 14:46
Over heating -- followup and question - Pete Masterson - 09-10-2006, 14:51
Over heating -- followup and question - Leroy Eckert - 09-10-2006, 15:16
Over heating -- followup and question - Mike Hohnstein - 09-10-2006, 16:14
Over heating -- followup and question - Gregory OConnor - 09-10-2006, 17:42
Over heating -- followup and question - David Brady - 09-11-2006, 02:30
|
User(s) browsing this thread: 2 Guest(s)