Over heating -- followup and question
|
09-10-2006, 14:46
Post: #24
|
|||
|
|||
Over heating -- followup and question
Mike, I've run out of the "evil old fashioned kind". Where can I buy
more these days? Curt Sprenger 1987 PT38 8V92, Anaheim Hills, Calif. Mike Hohnstein wrote: > Yeah? Why's that? You know something I've missed? > I suggested BRAKE KLEEN, not carb cleaner. That stuff might even get > the urathane to lift. > MH > ----- Original Message ----- > From: Leroy Eckert > To: WanderlodgeForum@yahoogroups.com > > Sent: Sunday, September 10, 2006 8:13 PM > Subject: Re: [WanderlodgeForum] Over heating -- followup and question > > Mike-- that is the cleaner that has acetone, MEK and other goodies in > a spray can available at WalMart or NAPA right? > Just do no not get it on the paint. > > Leroy Eckert > 1990WB-40 > Niceville, FL > ----- Original Message ----- > From: Mike Hohnstein > To: WanderlodgeForum@yahoogroups.com > > Sent: Sunday, September 10, 2006 7:40 PM > Subject: Re: [WanderlodgeForum] Over heating -- followup and question > > Douche that bad boy with Brake Kleen, not the safe stuff, the evil old > fashoned kind that really works. A case should do the trick and it > WILL clean out any thing. > MH > ----- Original Message ----- > From: Rob Robinson > To: WanderlodgeForum@yahoogroups.com > > Sent: Sunday, September 10, 2006 7:29 PM > Subject: Re: [WanderlodgeForum] Over heating -- followup and question > > Leroy I too cleaned my radiator recently and did the best I could without > taking the thing out. I noticed some paint had flaked off but opted not to > repaint because even though I cleaned it out as best I could I am not > confident that it is clean enough to paint. I'd be worried the paint would > combine with any dirt/soap residue left behind and clog the fins up. > > On 10/09/06, Leroy Eckert > > > > David: > > Thanks, seems reasonable. After Pete posted his problem I checked > mine out > > even though I do not have overtemp problems. The last time I cleaned > my the > > radiator was 18,000 miles ago. I washed it out this weekend and was > amazed > > at how much black water came out of the oil cooler, condenser and > radiator. > > The bus gets dirty with road film from the rain and all of that crud is > > sucked into the radiator by the fan. I will repaint my radiator > black next > > weekend. The condenser and oil cooler are not painted?? Any ideas on > that??? > > > > Leroy Eckert > > 1990 WB-40 > > Niceville, FL > > > > ----- Original Message ----- > > From: David Brady > > To: WanderlodgeForum@yahoogroups.com > > > > Sent: Sunday, September 10, 2006 5:26 PM > > Subject: Re: [WanderlodgeForum] Over heating -- followup and question > > > > They paint them black for the same reason that disc brake > > calipers are painted black - heat radiation. Everything radiates > > heat in the form of electromagnetic waves (energy). The ideal > > is Black Body Radiation. The emissivity of a painted black > > object radiates more like an ideal Black Body than other painted > > colors. > > > > David B > > '02 LXi Smokey > > Va > > > > Pete Masterson wrote: > > > > > > The radiator was painted. And I noticed that they paint all the > > > radiators in their shop that they're servicing ... there was a rack > > > with a bunch of radiators that were just painted... I saw that they > > > have a fan blowing air through the newly painted radiators ... > > > probably to keep the paint from clogging the air passages. > > > > > > > > > > [Non-text portions of this message have been removed] > > > > [Non-text portions of this message have been removed] > > > > > > > > -- > Rob, Sue & Merlin Robinson > 94 WLWB > > [Non-text portions of this message have been removed] > > [Non-text portions of this message have been removed] > > [Non-text portions of this message have been removed] > > [Non-text portions of this message have been removed] > > |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Over heating -- followup and question - krminyl@... - 09-08-2006, 06:35
Over heating -- followup and question - Pete Masterson - 09-08-2006, 10:12
Over heating -- followup and question - Leroy Eckert - 09-08-2006, 11:02
Over heating -- followup and question - Jerry - 09-08-2006, 11:06
Over heating -- followup and question - Pete Masterson - 09-08-2006, 11:33
Over heating -- followup and question - Pete Masterson - 09-08-2006, 12:20
Over heating -- followup and question - Mike Hohnstein - 09-08-2006, 12:46
Over heating -- followup and question - Tom Warner - 09-08-2006, 12:56
Over heating -- followup and question - Leroy Eckert - 09-10-2006, 08:56
Over heating -- followup and question - Pete Masterson - 09-10-2006, 09:07
Over heating -- followup and question - David Brady - 09-10-2006, 10:26
Over heating -- followup and question - Leroy Eckert - 09-10-2006, 11:41
Over heating -- followup and question - Rob Robinson - 09-10-2006, 12:29
Over heating -- followup and question - David Brady - 09-10-2006, 12:33
Over heating -- followup and question - Mike Hohnstein - 09-10-2006, 12:40
Over heating -- followup and question - Curt Sprenger - 09-10-2006, 12:51
Over heating -- followup and question - Leroy Eckert - 09-10-2006, 12:54
Over heating -- followup and question - Leroy Eckert - 09-10-2006, 13:07
Over heating -- followup and question - Leroy Eckert - 09-10-2006, 13:13
Over heating -- followup and question - Pete Masterson - 09-10-2006, 13:24
Over heating -- followup and question - Leroy Eckert - 09-10-2006, 13:31
Over heating -- followup and question - Mike Hohnstein - 09-10-2006, 13:34
Over heating -- followup and question - Leroy Eckert - 09-10-2006, 14:33
Over heating -- followup and question - Curt Sprenger - 09-10-2006 14:46
Over heating -- followup and question - Leroy Eckert - 09-10-2006, 14:46
Over heating -- followup and question - Pete Masterson - 09-10-2006, 14:51
Over heating -- followup and question - Leroy Eckert - 09-10-2006, 15:16
Over heating -- followup and question - Mike Hohnstein - 09-10-2006, 16:14
Over heating -- followup and question - Gregory OConnor - 09-10-2006, 17:42
Over heating -- followup and question - David Brady - 09-11-2006, 02:30
|
User(s) browsing this thread: 1 Guest(s)