Air Regulator - Microphor Toilet

[Curt Sprenger]

Thanks Rich,

I have thought about doing the same thing, but first I need to resolve a
leak(s) in the 120V compressor service lines, it cycles every 20 to 25
minutes, so I don't use it much, yet.

Curt Sprenger 1987 PT38 8V92, Anaheim Hills, Calif.



g_man1146 wrote:

>Hi Curt,
>
>I had the same problem and replaced the regulator with one that is
>mounted in the bay next to the aux tank instead of inside the back
>of the toilet. I also replaced the check valves at the same time.
>Total cost (MvMaster Carr) about $20.00. They have the plastic lines
>and push connector fittings too. The regulator is now mounted next
>to the one for the 120VAC compressor and since both have gauges, it
>is easy to adjust them so that the 12VDC compressor won't run unless
>the 120VAC or engine air is absent.
>
>Here is a link to the photo.
>http://www.photosleeve.com/gallery2/d/23...lators.jpg
>
>Rich D. '99LXi43' CT
>
>
>--- In WanderlodgeForum@yahoogroups.com, Curt Sprenger
> wrote:
>
>
>>We have the Microphor Air Operated toilet in our coach. The air
>>
>>
>pressure
>
>
>>regulator exhaust port is leaking, causing the compressor to cycle
>>
>>
>every
>
>
>>35 minutes. Microphor tells me that the regulator is defective,
>>
>>
>bad
>
>
>>seal(s).
>>
>>Microphor wants $290 for a new regulator, $95 for Microphor to
>>
>>
>rebuild
>
>
>>ours, $65 for a rebuild kit.
>>
>>Clippard wants about $15.00 for what looks to be the same
>>
>>
>regulator as
>
>
>>installed with our toilet.
>>
>>Has anyone replaced this regulator? What brand, part #, cost,
>>
>>
>purchased
>
>
>>where, etc?
>>
>>--
>>Curt Sprenger 1987 PT38 8V92, Anaheim Hills, Calif.
>>
>>
>>
>
>
>
>
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
>
>