HELP! stuck in Wisc - need wiring diagram for 88-89 DDEC I

[Gregory OConnor]

The code may not be the problem! that could be an old code. Humor me
and take the sight glass out of the puke tank, windex it, then
reinstall and over fill the puke tank. ( puke tank= the radiator
overflow just above the engine bay. I will fax this tip to the
number in your post also. Wisconsin, what a place to get stuck, good
luck.
GregoryO'Connor
94ptRomolandCa

--- In WanderlodgeForum@yahoogroups.com, KP Marsh
wrote:
>
> HELP!! we are stuck in Eau Claire Wisc. We were on our way over
to Antigo Wisc yesterday (Friday) to have the new slide outs
installed in ToWanda's bays when our "Check Engine" light came on and
she cut to half power. All gauges were reading just fine when the
light came on. She restarted for us and we were able to get her over
to River States Truck & Trailer. She ran fine, all gauges reading
normal, no power problems, just the Check Engine Light being on was
the only indication of a "problem."
>
> The diagnostic read out was telling River States that the problem
was the oil temperature sensor. They replaced the sensor but the
Check Engine light remains on. It appears to be a problem with
wiring going to the sensor. River States is trying to track down a
wiring diagram from Detroit for us.
>
> Does anyone out there have a wiring diagram for 88-89 DDEC I????
If so, please fax to (715) 874-4701 to the attention of Randy.
>
> Thanx in advance for any and all help,
> Ken & Patti Marsh
> ToWanda, 89 WB40, DDEC I
>
>
>
> [Non-text portions of this message have been removed]
>