Safeline

[Gardner Yeaw]

Thanks guys. When it stops raining I will go out and check. I opened
up the front yesterday but didn't find anything. It's probably by the
changeover switch.

I was thinking that if it is toast, I could simply employ two
relays (one 110 vac coil [connected at the changeover input side] and
one 12 vdc coil [connected to the ingition]) and wire the point sets
in series. If both relays are active a light or buzzer would be
activated. I can't imagine why anything more complicated would be
needed. I only have a 50 amp shore line connector so all shore lines
are wired to feed both phases so I don't need to worry about which
phase is active.

Gardner
78FC33

--- In WanderlodgeForum@yahoogroups.com, "Gardner Yeaw"
wrote:
>
> Does anyone know where the actual Safeline device is located in a
> 78FC? What does it look like? I tried to find something on the net
but
> all I find is Safeline metal detectors.
>
> Gardner
> 78FC33
>