Cruise Control???

[Doug Engel]

Kerry, Thanks, The actuator is still in place, but no connection to the throttle
linkage, I'll do some recon tomorrow to look for connection opportunities. Doug

davidkerryedwards wrote: Yes, I believe that
is the throttle cruise connection. On mine it goes from the actuator to
the throttle linkage. Do you have an actuator in place? My vacuum generator
failed and I
decided it to replace the vacuum system with an electric version since the
vacuum system
did not work that well anyway.

Kerry
82 Fc 35
Denver

--- In WanderlodgeForum@yahoogroups.com, "doug_ngl" wrote:
>
> Hey Gang, Happy T-Day! Nothing like a day of BB chores. I think I have
> a handle on my water problems, looks like a bad regulator/check valve
> and a seeping Sporlan letting the water run in a loop instead of
> building pressure when using the pump. Gonna look for parts tomorrow.
> The cruise does not work on our rig, so we used the hand throttle on
> the way home, kinda scary in traffic . While adjusting the throttle
> linkage, I saw a heavy gauage beaded chain laying in the valley under
> the air plentum. I pulled gently on the chain (it was not attatched to
> anything) and it came loose, bringing a short, light, broken cable
> with
> it. Is this the throttle/cruise connection? If so, where does it hook
> up, is there some bellcrank assy that I am missing? Any light that
> could be shed on the cruise control assy would be greatly appreciated.
> Thanks as always. Doug
>






Doug Engel, Gunnison, CO. 1981 FC35SB "Pokey"

---------------------------------
Everyone is raving about the all-new Yahoo! Mail beta.

[Non-text portions of this message have been removed]