Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
gauge readings 88 FC
01-18-2007, 14:19
Post: #2
gauge readings 88 FC
It's all good.
MH
----- Original Message -----
From: birdshill123
To: WanderlodgeForum@yahoogroups.com
Sent: Thursday, January 18, 2007 6:33 PM
Subject: [WanderlodgeForum] gauge readings 88 FC


The following are my readings at a constant 59 mph. flat country.
Water temp. 170
oil press. 70
Rear axle temp 210
ZF temp 195
Pyro 600 to 650
RPM 2000
ambient temp was 55 to 60
At ambient temp of 75 the water temp climbed to just over 175
I do not trust any of the gauges. I used my infrared thermometer on
the diff. and it was 160 to 165 depending on where you read. At the
sensor it was 160. I know that my gennie oil prssure is off by 15 lbs.
as I tested it with a non electric hydraulic gauge. I noticed that
when I am in the hills and the turbo kicks in the pyro temps can climb
to over 900. Boost is about 10 to 12. How does all of this look??

Bruce 1988 FC35
" LaReina Gitana"
on the road in Mexico





[Non-text portions of this message have been removed]
Quote this message in a reply
Post Reply 


Messages In This Thread
gauge readings 88 FC - birdshill123 - 01-18-2007, 12:33
gauge readings 88 FC - Mike Hohnstein - 01-18-2007 14:19
gauge readings 88 FC - Tom Warner - 01-18-2007, 15:29
gauge readings 88 FC - one_dusty_hoot - 01-18-2007, 16:43
gauge readings 88 FC - pattypape - 01-19-2007, 01:54
gauge readings 88 FC - birdshill123 - 01-19-2007, 02:33
gauge readings 88 FC - Chuck Wheeler - 01-19-2007, 05:28



User(s) browsing this thread: 1 Guest(s)