fuel shut off solenoid

[Tom Seitz]

Morgooder, I dont know where the wire is fed from. But some where
there is a write up on a wiring upgrade where you install a relay and
use the LOW voltage hot wire to the sol. to activate the new relay and
then run a new GOOD hot wire threw the relay on to the fuel shut off
sol.to keep 12v to the sol. at all times. Worked for me. Maybe its in
the files sec. not sure. Hope this helps. Tom 90 SP36 Alpharetta GA

--- In WanderlodgeForum@yahoogroups.com, "morgooder" <morgooder@...>
wrote:
>
> I have an intermittent problem with my fuel shut off solenoid. Engin
> wont start, right now I'm reading 6.5 volts at terminal. Does anyone
> know where this wire is fed from. Thinking about running a new wire
> from starter solenoid but would rather fix original wire. Don't see
> this on my drawings. 84 FC 31'
> Thanks
>