silcone hoses

[mbrund]

If you have a Fleetpride near you (there's one in Clarksville), they
handle various sizes in both stright and elbows.

Also make sure to get the proper type clamps for silicon hoses,
don't stop at the local car parts house and buy those car clamps. I
suggest in all cases they be stainless, and I would suggest a
constant tension type clamp (Ideal stainless FlexGear HD or Gates
Green Strip Constant Tension to name two). If the price of those is
too high for any project, at a minimum use a lined band type
stainless clamp, that way the band notches don't eat into the hose
and cause an early failure.

Michael Brundridge
'92 WB40
Georgetown, TX


--- In WanderlodgeForum@yahoogroups.com, "mjzakowski"
<mjzakowski@...> wrote:
>
> I am rebuilding my 6V92 and need to know where to buy some silcone
> hoses for the motor. thanks
>
> Joe in Indiana
> 1984 1/2 PT40
>