Air Steps--Resurfacing Ideas

[mariopatti1]

-I replaced mine with a plastic grass like door mat.They come in
colors I used a gray one.Cut to fit step, remove the "grass" from the
edge glue to step and replace the aluminum edge.A good place to wipe
your shoes .
Mario 1985FC in Marthas Vineyard without the Bird
-- In WanderlodgeForum@yahoogroups.com, "ajgibb2002"
wrote:
>
> The air steps on my '91SP are a rubber/vinyl tile that is a bit
> shabby, especially the leading edge. There is a right angle piece of
> aluminum serving as the edge on each step but it appears to have been
> glued and re-glued in place numerous times. I'm about to re-glue it
> but I know it will come off again and I'm wondering what ingenious
> methods have been used to re-surface the steps. I did see a picture
> on one of the forums where someone had replaced the step surface with
> diamond plate shiny steel. I think I would like some practical and
> durable tile-type surface with a leading edge that will last. Any
> help welcome.
> Austin
> '91SP
>