more than one problem

[ingamar2]

--- In WanderlodgeForum@yahoogroups.com, David Brady
wrote:
>
> Take the cables off the battery and measure the resistance (ohms)
> from connector to connector. Resistance should read zero. You
> may have a faulty cable. A battery at rest should read 12.6V and
> one charging should read 13.8V. I don't think you damaged any
> printed circuit cards.
>
> David Brady
> '02 LXi, NC
>
> ingamar2 wrote:
> >
> > --- In WanderlodgeForum@yahoogroups.com
> > , erniecarpet@ wrote:
> > >
> > > Craig, I wonder if the individuals that installed your
batteries
> > did not
> > > tighten the cables properly?
> > >
> > > Ernie Ekberg
> > > 83PT40
> > > Livingston, Mt
> > > ---soon to be in TEXAS
> > >
> > >
> > >
> > > ************************************** Get a sneak peek of the
all-
> > new AOL at
> > > http://discover.aol.com/memed/aolcom30tour
> > <http://discover.aol.com/memed/aolcom30tour>
> > > I cked the battery cable to see if they were wired correctly
and
> > if they were all tight and everything looks good. I put in six
new
> > t105 so no I didn't mix 6 and 12v. I pulled the dash out
yesterday
> > but didn't have time to ck it close. Will do that today and
maybe I
> > will find the problems with the alternators.
> >
> > Why would the votage go to 14 and then down to 12.8 and stay
there.
> > And could that have done damage to the circit board on the
fridge.
> >
> > Craig Hovda
> > Bigfork Mt
> > 90 WBWL
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
> >
> > -----------------------------------------------------------------
-------
> >
> > No virus found in this incoming message.
> > Checked by AVG Free Edition.
> > Version: 7.5.485 / Virus Database: 269.13.5/990 - Release Date:
9/4/2007 10:36 PM
> >
>
> I will ck that out today.


Craig Hovda
Bigfork Mt
90 WBWL
>
> [Non-text portions of this message have been removed]
>