no fuel

[putneyflash@...]

When you open the cover the service assembly sits in the vee of the engine
should be a solenoid standing stright up forward of the air cleaner. it should
click when the key is turned on.the fuel lines run from the assembly to the
injectors.there is usually a bleed screw or pitcock on top of the pump. if you
pump with the hand primeing pump you should get fuel out the bleed screw

-------------- Original message from "g" :
--------------



It is a 3208 and one of the problems has been finding the actual locations of
the fuel pump and the solenoid. Mike, Randy and the guys have given me some
direction there, so with my trusty meter and a set of spare hands( my pal
doesn't know I'planning to use his hands) I can ring that circuit out and
hopefully get this PROPERLY repaired and a test button installed. My # is
8166786227
Glenn
----- Original Message -----
From: putneyflash@...
To: WanderlodgeForum@yahoogroups.com
Sent: Monday, October 01, 2007 6:58 PM
Subject: Re: [WanderlodgeForum] no fuel

Me again: if its a 3208 what is your telephone number?
re

-------------- Original message from "g" :
--------------

I am still trying to get my 83 to start. Engine spins and will start with a shot
of wd40, but am getting no fuel from to the injectors to the cylinders. Where
would the pump be, or the device , solenoid or whatever makes the pump run? Is
there a separate fused circuit between the ignition switch and the pump? Any
other ideas?

DrDigger
83 FC35
Kansas City, mo

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]