Can I weld on my exhaust.

[Johnny M Slone]

--- In WanderlodgeForum@yahoogroups.com, "Glenn Allen"
wrote:
>
> I hit a low hanging limb with our farm tractor and cracked the
exhaust
> where the pipe enters the muffler. I was able to weld the two back
> together. This has been about 6 years ago and it is still holding
> today. Just make sure that where you weld is not rusted very much
> (only surface rust that can be removed). You will need enough metal
> thickness to support the depth of weld.
>
> If you are not a welder, find someone with a MIG or TIG welder to
do
> the work.
>
> Glenn Allen
> 1986 PT-40
> Marietta, GA
>
> --- In WanderlodgeForum@yahoogroups.com, "Johnny M Slone"
> wrote:
> >
> > My exhaust needs some repair where the stack attaches to the
muffler.
> > Is it possible to weld a new piece of pipe without removing the
> muffler
> > from the coach. It would be an easy fix if welding will not harm
any
> of
> > the electronics.
> > Any body have any experience doing this.
> > Thanks,
> > Johnny M Slone
> > Pikevile, Ky
> > 98 LXI 41
> >
>Thanks for all the advice. I'm going to disconnect the batteries and
make the repair without removing the muffler.
Johnny M Slone
Pikeville, KY
98 LXI