Air Height valves

[Mike Hohnstein]

Great out come, glad it's fixed.

MH

----- Original Message -----

From: "birdshill123@yahoo.com"

To: "WanderlodgeForum@yahoogroups.com"

Sent: Thursday, February 14, 2008 7:24 AM

Subject: [WanderlodgeForum] Re: Air Height valves

Thank you John:

It is fixed. This is a great story . After we got to Mazatlan I got on
the city bus to the Kenworth dealer. They were not interested in
working on a BB. Same with the IHC dealer. I tried a few large tire
shops as sometimes in Mexico they do air barke work and air suspension.
No luck. Finally I got on the city bus again. They are all privately
owned and have air brakes and doors. I asked the driver if he knew of a
good shop. Took me right to a street full of trucks and shops. The
first shop was strictly outdoors but they were working on a newer fire
truck and an 06 KW. I told them my story. In 2 minutes I was on the
back of a 100 cc motorcycle with the mechanic. At the CG he climbed
under despite my warnings about safety ( macho). He weighed all of
about 110 lbs. 15 minutes later we were done. Apparently the air supply
line and adapter fitting were not tight! Kind of like a Doctor that
makes house calls!! I will check those ball ends. Probably a Haldex or
Bendix part.

Bruce
1988 FC35