1985 Airstep parts

[sfedeli3]

Hi Mike,

The replacement cylinders can be had at Grainger (take the
originals with you and they can size them up), but the small locking
cylinder was a custom built piece for Bluebird from Clippard. You can
order a small cylinder from Grainger too, but it will have a threaded
end and you'll have to grind it down to a smooth point. As mentioned,
Stephen has the switches and controller components.

Shane Fedeli
85PT40
Hershey, PA

--- In WanderlodgeForum@yahoogroups.com, "mrkane1952" <mrkane@...> wrote:
>
> Greetings:
>
> The problem began during this winter in 12 DF temperatures, and has
> worsened until now the airstep on my 1985 PT40 has failed: air leaks
> constantly from the controller and the main cylinder, and the step
> does not retract. Are repair kits (elastomer seals, for example)
> available to rebuild the three cylinders? Are NOS or other
> replacement parts available?
>
> The three assemblies are marked...
>
> main cylinder
>
> locking pin
>
> >
>
> Thanks--
>
> M.R.Kane
> 1985 PT40
> currently Pilot Point, TX
>