1985 Airstep parts

[Stephen Birtles]

The solenoid is not polarity protected ground one wire from each end
and connect the red and yellow to the two remaining wires one at each end
if the step acts funky just swap the red and yellow

Stephen 77fc35


--- In WanderlodgeForum@yahoogroups.com, "mrkane1952" <mrkane@...> wrote:
>
> Greetings all:
>
> I have obtained replacement parts to repair my ailing airstep, but
> none are the same as the originals, leaving me with some questions.
> The new relay/control assembly has all black wires, but the two
> solenoids are separate, so it is easy to see which wire goes to which
> solenoid. On the original control, all the wires emerge from one end.
> The hot wires from the coach are red and yellow, but I can't tell
> which should go where on the new controller. Any help?
>
> What is recommended for replacement air lines?
>
> Thanks--
>
> M.R.Kane
> 1985 PT40
> currently Pilot Point, TX
>