92 WB Jacks

[ronmarabito2002]

If the motor runs, then it has to be one of the two solenoids. If
they were replaced, then check to see if they are wired correctly.
I believe the key has to be on for them to be energized. Maybe
not. I'm having a senior moment. Seems like when I replaced one of
my solenoids, it required the addition of a ground wire.

If none of this works, let me know. I'll go out to my coach and run
back through it.

R.E. (Ron) Marabito, Dallas, TX 92WB40
Moderator.


--- In WanderlodgeForum@yahoogroups.com, "Lawrence Thornell"
wrote:
> Ron
> The pump will run when wired straight with a hot wire. HWH says +
terminal
> should remain hot, then ground is applied when activated, + is
not
> hot-ground is not applied.
> Thanks Lt 90 SP in Eclectic, AL, a two Bird town, 1000 people, 2
Birds
>
> ----- Original Message -----
> From: "ronmarabito2002"
> To:
> Sent: Thursday, May 19, 2005 9:43 AM
> Subject: [WanderlodgeForum] Re: 92 WB Jacks
>
>
> > Check the motor by applying power directly to the motor
terminal. I
> > recently had a problem and it was a broken wire under the
termianl to
> > the armature. Any generator/starter shop can repair it if it
needs it.
> > Mine showed practically no wear inside. Will outlast me for
sure.
> >
> > R.E. (Ron Marabito, Dallas, TX 92WB40
> > Moderator
> >
> >
> > --- In WanderlodgeForum@yahoogroups.com, "Lawrence Thornell"
> > wrote:
> >> My buddy is having trouble with his jacks working on his 92
WB. He
> > has changed out 2 relays(Is there a 3rd one he hasn't found?)
Every
> > thing checks as he has been instructed by HWH but the pump will
not
> > come on. HWH says it should work by receiving a ground when
> > activated. He can make it(the pump) work by providing a hot
wire, not
> > a ground. Any ideas?
> >> Thanks LT 90 SP in Eclectic, AL.
> >>
> >>
> >> [Non-text portions of this message have been removed]
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >