Kohler slip ring replacement guide

[thomas_sorrentino]

My coach had the exact same problem as Ryans. I was able to complete
the remove and replace, exactly as he had described in his write up. I
was at Tom Warners rally, so I had helping hands and borrowed tools to
fall back on also.
Ryan went above and beyond in helping me on this also. I made the
mistake of not marking the wires carefully enough and not taking
before pictures. There were about 26 wires that needed to come off. In
the process of moving everything some of my wire markings had come
off. I had everything back together except there were three wires I
wasn't sure where they went. Ryan got on the phone with me, pulled up
his photo's and was able to talk me thru their proper hook up! I
really didn't want to do a smoke test after spending all that time
under there.
So all turned out well, and thanks again Ryan!

Tom Sorrentino
1987 PT38
Bedford Hill, NY

--- In WanderlodgeForum@yahoogroups.com, "Ryan Wright"
wrote:
>
> Here it is: http://www.ryanwright.com/wanderlodge/sliprings/
>
> Enjoy,
>
> -Ryan
> '86 PT-40 8V92
>