Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Refir LP and LP Heat Switch
11-10-2008, 06:46
Post: #12
Refir LP and LP Heat Switch
Curt,

Are we talking two different switches? It may be interpretation, but
I think I agree with what your book says: 12V power is supplied.

As I recall in my 83 PT, I could have power to the furnace igniters
without having LP going to them if the LP master or the alarm under
the dinette was off. On my 91, I don't have LP furnaces, but if either
(or both) the LP master is off and the alarm is off, I do not get any
LP to the stove or the frig, but I do have igniter power to them.

Am I reading this one wrong??

Mike Bulriss
1991 WB40 "Texas Minivan"
San Antonio, TX


--- In WanderlodgeForum@yahoogroups.com, "Curt Sprenger"
wrote:
>
> Blue Book states:
>
> "L.P. HEAT Switch - When in the ON position, 12v power is supplied
to the
> L.P.G furnaces."
>
> I believe our 'Bird is working as BB designed.
>
>
>
> On Mon, Nov 10, 2008 at 9:56 AM, mbulriss <mbulriss@...> wrote:
>
> > More than interesting; potentially dangerous? I thought that
both the
> > master LP switch and the gas alarm always had to be on for the LP
to
> > work on anything LP. Could PO have modified the frig?
> >
> > Mike Bulriss
> > 1991 WB40 "Texas Minivan"
> > San Antonio, TX
> >
> >
> > --- In
WanderlodgeForum@yahoogroups.com,
> > "Curt Sprenger"
> > wrote:
> > >
> > > I just went out to the 'Bird. The LP dash switch is in the off
> > position.
> > > The frig. LP works in this off mode. Interesting.
> > >
> > >
> > > On Sun, Nov 9, 2008 at 8:02 PM, Ed Gardels wrote:
> > >
> > > > --- In
> > WanderlodgeForum@yahoogroups.com

> > ,
> > > > "Scott Forman"
> > > > <scottforman75@> wrote:
> > > > > Ed Gardels 89sp
> > > > Arlington Texas
> > > >
> > > >
> > > > Scott.. I had the exact same problem in my 89sp, and your
right,
> > you
> > > > hace to have the lp heat sw on
> > > >
> > > > > I have been having sporadic luck getting my refir to work on
LP.
> > > > This
> > > > > evening, I have determined that it appears that it will only
> > work
> > > > on LP
> > > > > when the "LP Heat" switch on the dash is in the on position.
> > > > Anyone
> > > > > have any opinion why this would be? One should have nothing
to
> > do
> > > > with
> > > > > the other.
> > > > >
> > > > > Scott Forman
> > > > > 86 PT38
> > > > > Memphis
> > > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > > --
> > > Curt Sprenger
> > > 1987 PT38 8V92 "MacAttack Racing"
> > > Anaheim Hills, CA
> > >
> >
> >
> >
>
>
>
> --
> Curt Sprenger
> 1987 PT38 8V92 "MacAttack Racing"
> Anaheim Hills, CA
>
Quote this message in a reply
Post Reply 


Messages In This Thread
Refir LP and LP Heat Switch - Scott Forman - 11-06-2008, 12:31
Refir LP and LP Heat Switch - Gregory OConnor - 11-06-2008, 13:21
Refir LP and LP Heat Switch - sfedeli3 - 11-06-2008, 15:06
Refir LP and LP Heat Switch - Ed Gardels - 11-09-2008, 16:02
Refir LP and LP Heat Switch - Curt Sprenger - 11-10-2008, 05:12
Refir LP and LP Heat Switch - erniecarpet@... - 11-10-2008, 05:25
Refir LP and LP Heat Switch - pattypape - 11-10-2008, 05:53
Refir LP and LP Heat Switch - pattypape - 11-10-2008, 05:55
Refir LP and LP Heat Switch - mbulriss - 11-10-2008, 05:56
Refir LP and LP Heat Switch - jim riordan - 11-10-2008, 06:28
Refir LP and LP Heat Switch - Curt Sprenger - 11-10-2008, 06:31
Refir LP and LP Heat Switch - mbulriss - 11-10-2008 06:46
Refir LP and LP Heat Switch - Curt Sprenger - 11-10-2008, 06:52
Refir LP and LP Heat Switch - Curt Sprenger - 11-10-2008, 06:54
Refir LP and LP Heat Switch - mbulriss - 11-10-2008, 07:26
Refir LP and LP Heat Switch - Kurt Horvath - 11-10-2008, 07:31
Refir LP and LP Heat Switch - Joyce and Richard Hayden - 11-10-2008, 07:35
Refir LP and LP Heat Switch - Jean Eichenlaub - 11-10-2008, 13:00



User(s) browsing this thread: 1 Guest(s)