Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ShurFlo 5.7
12-12-2008, 02:38
Post: #20
ShurFlo 5.7
My original Surflo didn't have the screw to adjust the pressure. It was
under warrenty so sent it back and got one that had the screw.
Still had the problem, so drilled a hole under the bed to get a hot
wire to the batts.
Solved the problem.
Bob Lawrence
84 PT36
San Antonio,Texas

> I should ask, if it is voltage drop, is there a convenient place back
> there to tie into a hot lead that will handle the power? Or am I going
> to be tearing everything apart to fish a wire down to the batteries?
>
> -Ryan
> '86 PT-40 8V92
Quote this message in a reply
Post Reply 


Messages In This Thread
ShurFlo 5.7 - Ryan Wright - 12-10-2008, 15:58
ShurFlo 5.7 - Terry Neal - 12-10-2008, 16:29
ShurFlo 5.7 - timvasqz - 12-10-2008, 17:16
ShurFlo 5.7 - Ryan Wright - 12-10-2008, 17:36
ShurFlo 5.7 - freewill2008 - 12-10-2008, 18:33
ShurFlo 5.7 - Henry Jay Hannigan - 12-10-2008, 18:38
ShurFlo 5.7 - freewill2008 - 12-10-2008, 18:40
ShurFlo 5.7 - Stephen Birtles - 12-10-2008, 19:33
ShurFlo 5.7 - david brady - 12-11-2008, 02:36
ShurFlo 5.7 - Pete Masterson - 12-11-2008, 05:44
ShurFlo 5.7 - Donald Spithaler - 12-11-2008, 09:47
ShurFlo 5.7 - Gardner Yeaw - 12-11-2008, 11:11
ShurFlo 5.7 - freewill2008 - 12-11-2008, 11:11
ShurFlo 5.7 - drw907 - 12-11-2008, 12:30
ShurFlo 5.7 - Donald Spithaler - 12-11-2008, 13:45
ShurFlo 5.7 - Gardner Yeaw - 12-11-2008, 14:00
ShurFlo 5.7 - Bob Lawrence - 12-11-2008, 14:28
ShurFlo 5.7 - Ryan Wright - 12-11-2008, 18:54
ShurFlo 5.7 - Ryan Wright - 12-11-2008, 18:55
ShurFlo 5.7 - Bob Lawrence - 12-12-2008 02:38
ShurFlo 5.7 - freewill2008 - 12-12-2008, 06:09
ShurFlo 5.7 - timvasqz - 12-12-2008, 15:45
ShurFlo 5.7 - drw907 - 12-12-2008, 16:09
ShurFlo 5.7 - Ryan Wright - 12-18-2008, 15:16
ShurFlo 5.7 - freewill2008 - 12-18-2008, 16:09
ShurFlo 5.7 - Ryan Wright - 12-19-2008, 10:28
ShurFlo 5.7 - Ryan Wright - 02-15-2009, 07:29
ShurFlo 5.7 - Bob Lawrence - 02-15-2009, 08:13
ShurFlo 5.7 - Ernie Ekberg - 02-15-2009, 10:00
ShurFlo 5.7 - timvasqz - 02-15-2009, 10:27
ShurFlo 5.7 - Pete Masterson - 02-15-2009, 11:21
ShurFlo 5.7 - Ryan Wright - 02-16-2009, 08:10



User(s) browsing this thread: 1 Guest(s)