Spot/Flood Lights

[John]

Scott,

I just watched Rob do his thing on the light, but it works now, the
only thing that he couldn't fix was the deteriorated rubber boot that
seals off the bottom.


"REMEMBER SEPTEMBER 11, 2001"
John Finn
'82 35FCRB
BLUEBIRD WANDERLODGE
TO VISIT THE "FINN'S INN EXPRESS" REMODELING ADVENTURE
GO TO;
http://www.pbase.com/image/24977457
'66 SUPERIOR / IH 392 GAS V8 32' PUSHER "FOR SALE"
SEE THE OLD COACH AT:
http://www.pbase.com/image/26052733
HOPKINS, SOUTH CAROLINA

///////////////////////////////////////////

--- In WanderlodgeForum@yahoogroups.com, randydupree
wrote:
> rob robinson (where are you rob?) took john finns light down and
took it apart,greasing and cleaning everything in there,i think he
made it all work again.it was just dirty..maybe john
remembers..randydupree93wb
> ----- Original Message -----
> From: Scott
> To: WanderlodgeForum@yahoogroups.com
> Sent: Friday, June 10, 2005 7:21 AM
> Subject: [WanderlodgeForum] Spot/Flood Lights
>
>
> I am trying to trouble shoot the spot/flood lights on our 86FCRB.
They
> are Jabsco model 61026. The port light comes on and will switch
from
> flood/spot the starboard light bulb is cracked(on order from
grainger
> 40.00 ouch) But both have quit moving in either direction vert or
> horiz. I have pulled the overhead panel down and separated (I
think)
> the switches from the wiring harness from the light. Hooked up
12v
> directly to the wires to make the dc motor drive and ... nothing.
The
> folks at Jabsco have been very helpful and say the motors are
very
> durable and they doubt the motors have gone bad. Just mention
> the "turkey" incident and he will immediately be your friend..lol
>
> Does anyone know how long the wiring harness from the light is
from
> Jabsco to the BB wiring harness..want to eliminate any additional
> connectors.
> What about the routing of the harnesses??
> Diagrams say small fuse is in the upper front load center found
that
> its ok ..or appears to be. Checking this before dis-assembly of
the
> light itself..
> Anyone have some other ideas as to a solution.
> Scott
> 86FC35 "RUBY"
> Murrells Inlet SC (right next to heaven)
>
> PS..it's interesting the wiring behind the panel found
several "cut"
> wires thats another post.
>
>
>
>
>
>
> --------------------------------------------------------------------
----------
> Yahoo! Groups Links
>
> a.. To visit your group on the web, go to:
> http://groups.yahoo.com/group/WanderlodgeForum/
>
> b.. To unsubscribe from this group, send an email to:
> WanderlodgeForum-unsubscribe@yahoogroups.com
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
>
> [Non-text portions of this message have been removed]