Alternator Question??

[randydupree]

ron,all 6 of those relays are for the amp meter?randydupree93wb
----- Original Message -----
From: ronmarabito2002
To: WanderlodgeForum@yahoogroups.com
Sent: Saturday, June 11, 2005 6:42 PM
Subject: [WanderlodgeForum] Re: Alternator Question??


--- In WanderlodgeForum@yahoogroups.com, "nslinkman"
wrote:
> I have a 1994 40'wb. When I have my alternator switch on the dash in
> the middle position when starting the bus I read about 150 amps. But
> when I turn the switch to alternator 1 or alternator 2 I the needle
> does not move. It stays on `0'. What does this mean? The bus runs
> great.
> Thanks
> Nelson Slinkman
> Westminster, Maryland

Don't understand your 150 amps but, you probably have one or more
relays that are bad or circuit breakers that are in the alternator
gauge circuit. Call Benny and have him send you the wiring diagram.
There are at least two circuit breakers that could be your problem
right after the shunt on the firewall. There are also 6 relays in the
inverter/battery compartment, right at the top left that control the
ammeter.

R.E. (Ron) Marabito, Dallas, TX 92WB40
Moderator




------------------------------------------------------------------------------
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/WanderlodgeForum/

b.. To unsubscribe from this group, send an email to:
WanderlodgeForum-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]