How do you remove a Sharp microwave/convection oven?

[ronmarabito2002]

Eric: The rear of the Sharp is supported on a bracket screwed to the rear
wall. Support the Micro-wave in front until the screws from the top are
removed, then lift the unit up to get it off the bracket. Just make sure you
have some help. And remove the chord. I guess you know access to the screws is
made by removing the panel above the micro-wave.

R.E. (Ron) Marabito, Dallas, tX 92WB40

--- In WanderlodgeForum@yahoogroups.com, "Eric" wrote:
>
> Well, I found two screws that go through the cabinet base above the microwave.
Looks like these are the fasteners that hold the front of the unit up. Tomorrow
I'll get the wrecking ball and try to get those fasteners out.
>
> Eric Perplies
> 96' PT-42
>