jacking up the bus

[Ralph]

One other area to look at after a decision of where your going to jack the
frame. With the suspension inflated, measure the distance between the top of the
lower frame and bottom of the upper frame the cut Oak blocks to fit in between
the frames. This will safely keep the extra 4 inches from the ride height in
place, after you dump the suspension with the blocks in place
Safe travels, Ralph &
Charolette Fullenwider
'84 FC35 "Ruff Diamond"
Duncan, Oklahoma
Sent via BlackBerry by AT&T

-----Original Message-----
From: MARGARET M ZAKOWSKI <mjzakowski@...>
Sender: WanderlodgeForum@yahoogroups.com
Date: Wed, 8 Sep 2010 09:50:28
To:
Reply-To: WanderlodgeForum@yahoogroups.com
subject:[WanderlodgeForum] jacking up the bus
Does any one know where the jacking points on the rear of the bus? Might
have to remove the tranny and the levelers do not jack up high enough.

Joe
1984 pt 40
____________________________________________________________
Mortgage Rates Hit 3.25%
If you owe under $729k you probably qualify for Obama's Refi Program
http://thirdpartyoffers.juno.com/TGL3141...6925m06vuc


------------------------------------

Yahoo! Groups Links