FYI - 3208 Lube Oil Leak Problem Solved

[Don Bradner]

They will be servicing mine tomorrow morning!

Don Bradner
90 PT40 "Blue Thunder"
My location: http://www.bbirdmaps.com/user2.cfm?user=1

On 11/8/2010 at 2:40 AM bberic35 wrote:

>Mike,
>Work was done at Seguin DIesel. Clyde Schumman and his boys are top notch
>in my book.
>Regards, Eric
>84FC35SBWL2
>
>--- In WanderlodgeForum@yahoogroups.com, "mbulriss" <mbulriss@...> wrote:
>>
>> Eric,
>>
>> For future reference on my part, which diesel mechanic did you use?
>>
>> Thanks,
>>
>> Mike Bulriss
>> 1991 WB40 "Texas Minivan"
>> San Antonio, TX
>>
>> --- In WanderlodgeForum@yahoogroups.com, "bberic35" wrote:
>> >
>> > Few days back I was looking for info on source of lube oil leak I had
>on top of our 3208. After checking on my own and replacing the lube oil
>hose to the air compressor, the leak was still going. Finally decided to
>turn it over to a real diesel mechanic. Turned out the lube leak was
>coming from a bad O ring where the fuel injection pump shaft is inserted
>into the block. Mechanic had to open up the front end to remove the fuel
>injection pump. Big job - beyond my capabilities!
>> >
>> > Regards, Eric
>> > 84FC35SBWL2
>> >
>>
>
>
>
>
>------------------------------------
>
>Yahoo! Groups Links
>
>
>