1990 W-B40 CHARGING SYSTEM

[Chuck Wheeler]

Ed,

I have “overhauled” all three
of the furnaces in our 82 so if you need any help or information give me a
call. I can’t tell you how to get the furnace our of a SP but can say to
look real carefully. I started to tale the cabinet apart to remove one of ours
only to discover that all the parts around the furnace was held in place by magnets.
I all of ours the case stayed in place. There were two screws in front, then
I had to remove the gas line and the screw through the exhaust and the “works”
slid out.

-
Chuck Wheeler-

-
1982 FCSB Fort Worth
TX -

---

From: WanderlodgeForum@yahoogroups.com [mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of wl89spman

Sent: Thursday, February 17, 2011
8:42 PM

To: WanderlodgeForum@yahoogroups.com

Subject: [WanderlodgeForum] Re:
1990 W-B40 CHARGING SYSTEM

Jamie, need more info to help you... which bay do you need picts. of.. I had
charging problems for 2 years with my PD9155's(2). long story short the
chargers were bad. Replaced them with a 9280(1). No more charging prob..



Ed Gardels 89SP

Arlington Tx



--- In "WanderlodgeForum%40yahoogroups.com",
"jamiejbrandt" wrote:

>

> HELLO ALL

> QUICK QUESTION DOSE ANYONE KNOW ANYTHING ABOUT THE BATTERY CHARGING FROM
THE INVERTER THERE IS TWO WIRES THAT GO FROM THE STARTER SOLENOID BOTH HAVE
DIODES IN THEM DOSE ANYONE KNOW WHAT THEY DO?? AND IF ANYONE HAS A PICTURE OF
THIS PLEASE EMAIL THEM TO ME JAMIEJBRANDT@...

> I REMOVED ONE WIRE NOT KNOWING THE DIODE WAS THERE AND I REDID THE WIRE
AND IM NOT SURE WHICH WAY THE DIODE GOES

> THE WIRES WERE DRY AND BRITAL

> IT SEEMS LIKE IM NOT GETTING A CHARGE FROM THE BATTERY
CHARGER

> JAMIE BRANDT

> 1990 WB-40

> FLORIDA

>