Titling/registration help

[Trader Den]

Thanks but I can't get it started to drive to scales.

--- In WanderlodgeForum@yahoogroups.com, David Heibult wrote:
>
>
>
> Dennis; I live in SD and have a PT all you need is a certified scale weight
from
>
> a truck stop or grain elevator and give that to the lic people and that should
do it David Heibult 91WLWB
>
>
> To: WanderlodgeForum@yahoogroups.com
> From: gnburke@...
> Date: Mon, 23 May 2011 18:37:11 -0400
> Subject: Re: [WanderlodgeForum] Titling/registration help
>
>
>
>
>
>
> I don't know where they are on the PT's Dennis, but my FC31 has Tags from the
factory showing the gross Vehicle wgt,etc. up near the front of the bus. You
should be able to find tags somewhere on your PT that identify the vehicle as to
what it is, date of mfg., etc. There are tags that tell you the axle wgt. as
well. Seems that you could take pictures of these to them. Some buses also had
blue boxes that had the original paper work and a whole slew of info. on what
the bus came with. Good Luck. Hope this info. helps you. George Burke 1977 FC31
Charlotte
>
>
> On Mon, May 23, 2011 at 6:21 PM, Trader Den wrote:
>
>
>
>
>
>
> Greetings Folks,
> I am in the process of trying to title and register my Blue Bird in South
Dakota, however I've run in to a snag. I am in Boise Idaho and finalized the
purchase last December and haven't been able to get it started since. The state
of SD requires among other things a weight verification on the unit. Obviously I
haven't been able to get it to a scale to fulfill this requirement and in the
meantime they tell me I am allowed only 30 days from date of purchase to get it
registered. After 30 days penalties and interest start accruing. It was
suggested that I get verification of weight from the factory. I explained the
fact that they're out of business and NADA does not list the weights in their
guides. Does anyone have a suggestion on how I can supply SD with an arms-length
opinion, on a weight they can use?
>
> TIA
>
> Dennis Gloe
> 1985 PT40
>