110 v motor

[David Heibult]

I put a new 1/4 hp electric 110v motor on my generator for the second
raditor .I had a electrican wire it up/ but now the problem. It will
only run for a couple of minutes then overheats and dies.You let it set
for half hour and it will run again. the only diff I saw was when we
wired up the Cap. we went with 2 wires from the motor instead of one
like the old motor .on the old motor the white wire went to the cap and
the other white wire went from the source went to the other side of
the cap. now the electrican wired both brown wires to the cap and the
white wires from the motor and the white wire from the source he wird
direct. my understanding the cap comes only in play when you first
start the motor then doesen't it drop off line from then on.I'm
wondering if the cap is running all the time and overheating the
motor.Dave 91WLPT 40 & 82 FC 35