CHECK VALVE WB-40

[Don Bradner]

I replaced mine with a Shurflo unit. The old one was working fine, but it was 40
psi, and I wanted to bring it up to the pressure the water pump puts out.
Shurflo makes theirs in more than one pressure, and I chose to go to 65 psi.

I had to modify in two ways. First was to cut out some of the opening after the
old one was removed. Second was to cut off some of the new one at top and bottom
(it is a plastic housing) to fit in the chamber. It has been working fine for a
couple of years now.

Picture here: http://www.arcatapet.net/travel/bluebirds/shurflo.jpg I use brass
quick-connects on the fill hose.

Example of place to buy:
http://www.adventurerv.net/shurflo-press...960.h\
tml

Don Bradner
90 PT40 "Blue Thunder"
My location: http://www.bbirdmaps.com/user2.cfm?user=1

On 7/16/2012 at 6:39 PM Jamie wrote:

>HI ALL
>I wanted to know if anyone knows where I can get the check valve on a 1990
>wb40 water fill ??where you hook up the hose
>thanks
>all help is appreciated
>Jamie Brandt
>1990 wb40
>Florida
>email JamieJBrandt@...
>
>
>
>
>------------------------------------
>
>Yahoo! Groups Links
>
>
>