Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
LXi and WideBody PTO/Pump Splines
06-29-2013, 12:36
Post: #23
RE: LXi and WideBody PTO/Pump Splines
(06-29-2013 01:05)cmillsap Wrote:  The present u-line configuration does include a length of flexible hose.

Hi Chuck,

There is a section of flexible hose, but on my bus there's a metal bracket attached to the top of the transmission that attaches to the U-Pipe to support it. The bracket attaches to the U-Pipe with one of these.

From our Document library, Chelsea Parts List and QCC Series 180 Pump Tech Specs:

Length:
Chelsea: centerline to end of AF flange: 4.32"
QCC Series 180-30: 6.04", weight: 20.5 lbs (This is with the standard side ported configuration, the rear port config might add another inch or two).

Combined Length: 10.36" (Plus a smidge for the rear ported config)

I think we're good with length and probably okay with weight too depending upon the weight of the fluid filled hoses; nonetheless, Chelsea recommends a rear mount in all cases.

david brady,
'02 Wanderlodge LXi 'Smokey' (Sold),
'04 Prevost H3 Vantare 'SpongeBob'

"I don't like being wrong, but I really hate being right"
Find all posts by this user
Like Post Quote this message in a reply
Post Reply 


Messages In This Thread
RE: LXi and WideBody PTO/Pump Splines - davidbrady - 06-29-2013 12:36



User(s) browsing this thread: 5 Guest(s)