Wire tracing

[Tom Warner]

If you have the complete set of drawings for your coach, they are color
coded and very easy to trace once you learn the system. Most multimeters
have a resistance function with a tone to check diodes and you can use that
to trace wires if you want an easier method. Connect one probe to the wire
you are interested in and the other end of the meter to ground. Then you
can sequentially touch each wire in another location to ground and when it
tones you have found the wire. This assumes of course you have all power
turned off.

Tom
1982 FC35
Vernon Center,NY

At 04:26 AM 7/29/2005 +0000, you wrote:
>Can anyone recommend a decent "Tone & Probe" for tracing wires? I
>tried the Home Depot unit and promptly returned the junk.
>
>Troy, 8FC33