90sp36 Onan 3cyl dcd Genset

[williamcharrison]

Hi Tom,
The genset number is 8DKDF J3244BC.

--- In WanderlodgeForum@yahoogroups.com, Tom Warner
wrote:
>
> Look on your control box and get the number. With that someone may
> have a schematic ( I have a few for the control boxes but had to
go
> back to Kohler to finally get the correct one for mine. . If you
take
> the cover off the control box check the relays inside and get the
> numbers off those also. If it is anything like mine it has two
bosch
> relays and a Potter blumfield KUP155-120. I have torn mine all
apart
> and have derusted and painted it and completely rewiring it so it
is
> at last reliable(I hope).
>
> Tom Warner
> 1982 FC35
> Vernon Center,NY
>
> At 01:50 PM 10/24/2005, you wrote:
> >Hi all,
> >I have tried suggestions from several folks re checking switches
and
> >presence of 12v at the stop solenoid. Switches are ok and the 12v
> >required to operate the stop solenoid is present only when the
start
> >button is depressed. If I had a full schematic I could probably
> >figure it out but I don't. Could the problem be an oil pressure
> >sensor?
> >
> >
> >
> >
> >
> >----------
> >YAHOO! GROUPS LINKS
> >
> > * Visit your group
>
> "<http://groups.yahoo.com/group/WanderlodgeForum>WanderlodgeForum"
on the web.
> > *
> > * To unsubscribe from this group, send an email to:
> > *
> > subject=Unsubscribe>WanderlodgeForum-unsubscribe@yahoogroups.com
> >
> > *
> > * Your use of Yahoo! Groups is subject to the
> > <http://docs.yahoo.com/info/terms/>Yahoo! Terms of Service.
> >
> >
> >----------
>