LED Taillights

[Scott Forman]

Can they just be wired straight in with no modifications? Do the
mounting holes in the body line up?


--- In WanderlodgeForum@yahoogroups.com, "Jeff Miller"
wrote:
>
> I used standard round bus LED lights, several MFGRs make them,
bought
> mine at Holland Bus Company but likely any truck supplier or school-
bus
> dealer will have them for around $35/each.
>
> The stripes are put on after the taillamps so the slight amount of
> newly-exposed body on the upper two will not be striped. You'll
> probably want to either touch-up or install a round trim-piece to
cover
> the footprint from the original lights.
>
> When you do the install, run a tail-lamp wire up from the lower one
so
> that you get four tail-lamps instead of two. The upper light
originally
> is only brake-turn, no tail.
>
> - Jeff Miller
> in Holland, MI
>
>
> --- In WanderlodgeForum@yahoogroups.com, "Scott Forman"
<sforman@r...>
> wrote:
> >
> > I am new here and am the proud owner of an 82 FCRB35. I am
> interested
> > in info on installing LED taillights, specifically where I can
> purchase
> > the equipment and what modifications are required.
> >
> > Thanks
> >
>