Question on a DC problem

[curlesw]

Thanks to everyone, I had never seen a breaker like this before.

The part was REALLY hot, so I disconnected it and let it cool. I
think it maybe the breaker of outside Vista lights which was an
option. They have been a bit troublesome and do have some exposed
wires...will need to either be replace or just remove altogether.

Thanks again to all for the info, I have enough info to tackle ths
prblem.

v/r
Wayne C.
San Diego, CA
1985 PT40

--- In WanderlodgeForum@yahoogroups.com, "Glenn Allen"
wrote:
>
> Wayne,
>
> I cannot tell the pin number from the picture, but on my wiring
> diagram for the Right Front Load Center, pin #1 has as 10ga black
> wire attached at the buss and going to a 30A fuse holder part
number
> 2272839. This is for an outside freezer. Do you have anything
> plugged into the bay or do you have an outside freezer? The part
in
> the picture looks like it might be an auto-resetting breaker so
maybe
> someting is pulling too much load causing a trip, then it resets
and
> cycles again resulting in the clicking sound. If this is the case,
> either the part is bad or you have too much load. Check the
current
> draw with a meter.
>
> Glenn Allen
> 1986 PT-40
> Marietta, GA
>
> --- In WanderlodgeForum@yahoogroups.com, "curlesw"
> wrote:
> >
> > Got a question on a DC problem. We were sitting in the Bird and
> all of
> > sudden, the lights starts to "flick" every 10 secs and
a "clicking"
> > noise was coming from the right load center. Upon investigation,
> the
> > clicking noise was coming from a small black part which looks
like a
> > relay. I have a picture but can't post it here.
> >
> > Anyone know what this is and what could be the problem. Did the
> part
> > just fail or is there another problem somewhere else. I posted a
> > picture and placed a picture of the part in the album Curles_1985
> PT-40.
> >
> > Thanks much.
> >
> > v/r
> > Wayne C.
> > 1985 PT-40
> > San Diego, CA
> >
>