AC power lost on one leg

[Ernie Ekberg]

I was in Don's coach at Quartzite. He has 4 air conditioners going to keep all that electronic "stuff" cool. I haven't a clue what all those things are with all those lites. Ernie Ekberg 83PT40 Wanderlodge Weatherford, Tx 817-475-3991 www.ernieekbergflooring.net --- On Sat, 7/31/10, Don Bradner wrote: From: Don Bradner Subject: Re: [WanderlodgeForum] Re: AC power lost on one leg To: WanderlodgeForum@yahoogroups.com Date: Saturday, July 31, 2010, 11:55 AM Gary, I'm reading the 130 off the digital display for the ProSine. I have tons of expensive electronics (besides normal Blue Bird stuff) in my bus (others here can attest!) and have never had a problem. On 7/31/2010 at 4:38 AM GARY MINKER wrote: >Use a real voltmeter and do not trust the panel mount units. If you >really have 130 volts you have other issues that will cause damage to the >rest of your things. >gary 85pt40 > >--- On Fri, 7/30/10, Don Bradner <bluethunder@...> wrote: > >From: Don Bradner <bluethunder@...> >Subject: Re: [WanderlodgeForum] Re: AC power lost on one leg >To: WanderlodgeForum@yahoogroups.com >Date: Friday, July 30, 2010, 8:17 PM > > > > > > > > > > > > > > > > > > My generator is different than yours (a "Universal" only used in >1990, I think), that runs at 130v no-load at 60Hz. If I set its speed down >at all the voltage will drop, but so will the Hz. Under significant load >it drops to around 128v. > > > >I've not experienced any problems except I had to set the max level for my >inverter (ProSine 2.0) to 131 or it won't kick out of inversion mode. > > > >Don Bradner > >90 PT40 "Blue Thunder" > >My location: http://www.bbirdmaps.com/user2.cfm?user=1 > > > >On 7/30/2010 at 11:27 PM artw wrote: > > > >>--- In WanderlodgeForum@yahoogroups.com, "Fred Hulse" wrote: > >>> > >>> Art > >>> Check the circuit breakers at your panel and also you may have circuit > >>brkrs at the genset. > >>> Fred Hulse > >>> 97BB41 > >>> > >>Ckt breakers cheched OK. > >> > >>Today I took the cover off the AC breaker panel. > >>I disc. the two inputs to the panel and swapped them. Started the genset > >>and had power to both legs. I ran it for about 20 minutes. Nothing > >>abnormal. I am curious as to why the main voltmeters both about 130v. > >>Is that in range? > >> > >> > >>Art Weatherly > >>Riverside Ca > >>'85 PT36 ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/WanderlodgeForum/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/WanderlodgeForum/join (Yahoo! ID required) <*> To change settings via email: WanderlodgeForum-digest@yahoogroups.com WanderlodgeForum-fullfeatured@yahoogroups.com <*> To unsubscribe from this group, send an email to: WanderlodgeForum-unsubscribe@yahoogroups.com <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/