Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Shift Selector
02-27-2007, 06:54
Post: #1
Shift Selector
When your shift selector goes out you are in for a treat, can't go
farward or backward depending on which button goes out, mine was
reverse. This little baby was $1300 with me installing it myself.
Prices are what ever the market will bare.
Ms Patticake
90PT 40WB Jus Chillin (Mardi Gras Circus Wagon)
Quote this message in a reply
02-27-2007, 07:00
Post: #2
Shift Selector
Sorry about that. Sure do like my old FC manual shifting lever, as long as the
cable don't rust up.
MH
----- Original Message -----
From: patticake592000
To: WanderlodgeForum@yahoogroups.com
Sent: Tuesday, February 27, 2007 12:54 PM
Subject: [WanderlodgeForum] Shift Selector


When your shift selector goes out you are in for a treat, can't go
farward or backward depending on which button goes out, mine was
reverse. This little baby was $1300 with me installing it myself.
Prices are what ever the market will bare.
Ms Patticake
90PT 40WB Jus Chillin (Mardi Gras Circus Wagon)





[Non-text portions of this message have been removed]
Quote this message in a reply
02-27-2007, 12:48
Post: #3
Shift Selector
Patticake, was the burnt out reverse selector "the caues" or "a
result" ????? It may be the component or wire powered by selecting R
that has issues. Replacing a fuse or switch hardly ever fixed a
problem.

You can buy alot of pullthru site upgrades for $1,300.00

GregoryO'Connor
94ptRomolandCa

--- In WanderlodgeForum@yahoogroups.com, "patticake592000"
<sgureasko@...> wrote:
>
> When your shift selector goes out you are in for a treat, can't go
> farward or backward depending on which button goes out, mine was
> reverse. This little baby was $1300 with me installing it myself.
> Prices are what ever the market will bare.
> Ms Patticake
> 90PT 40WB Jus Chillin (Mardi Gras Circus Wagon)
>
Quote this message in a reply
02-27-2007, 16:58
Post: #4
Shift Selector
Greg,
The buttons are pressure sensitive, with two circuit boards below
that. The reverse button lost it's internal contact.
I assume that it can be rebuilt, but I was short on time.
Steve Gureasko
40WB40 Jus Chillin
Ponchatoula, La.
Quote this message in a reply
02-28-2007, 04:48
Post: #5
Shift Selector
Steve, Wish there was a place you could log that part for sale long
term with a description of issue. I would have wires coming out of
the shift console with a colorchart for shift selection before I
opened my wallet. I have a tractor under MFG. warranty that keeps on
blowing the keyboard contact for the same function. In my instance,I
believe repeat replacement at their expence prove a component
problem. I just fear $1,300.00 is too much tuition.
GregoryO'Connor
94ptRomolandCa

--- In WanderlodgeForum@yahoogroups.com, "patticake592000"
<sgureasko@...> wrote:
>
> Greg,
> The buttons are pressure sensitive, with two circuit boards below
> that. The reverse button lost it's internal contact.
> I assume that it can be rebuilt, but I was short on time.
> Steve Gureasko
> 40WB40 Jus Chillin
> Ponchatoula, La.
>
Quote this message in a reply
02-28-2007, 14:10
Post: #6
Shift Selector
This won't make you feel better now but I documented a source for your
shift selector in the Parts database back in 2004. Chances are you
will never need another one but if anyone else does, this company can
save you a grand or more vs. Allison prices. David Hanvy 89 WB Crosby
TX

--- In WanderlodgeForum@yahoogroups.com, "patticake592000"
<sgureasko@...> wrote:
>
> When your shift selector goes out you are in for a treat, can't go
> farward or backward depending on which button goes out, mine was
> reverse. This little baby was $1300 with me installing it myself.
> Prices are what ever the market will bare.
> Ms Patticake
> 90PT 40WB Jus Chillin (Mardi Gras Circus Wagon)
>
Quote this message in a reply
03-01-2007, 02:23
Post: #7
Shift Selector
Oooouch!! $200 repair versus $1300 replacement! I found the entry
David made in the Parts Database.

Just goes to show it is always best to search the forum resources
before embarking on a project. I know I've been guilty of forgetting
that sometimes also, but that one hurt. Sorry Steve!

Thanks to all the members that keep adding to the forum Files,
Databases and Links!

Mike Bulriss
1991 WB40 "Texas Minivan"
San Antonio, TX


--- In WanderlodgeForum@yahoogroups.com, "David Hanvy" <shanvy@...> wrote:
>
> This won't make you feel better now but I documented a source for your
> shift selector in the Parts database back in 2004. Chances are you
> will never need another one but if anyone else does, this company can
> save you a grand or more vs. Allison prices. David Hanvy 89 WB Crosby
> TX
>
> --- In WanderlodgeForum@yahoogroups.com, "patticake592000"
> <sgureasko@> wrote:
> >
> > When your shift selector goes out you are in for a treat, can't go
> > farward or backward depending on which button goes out, mine was
> > reverse. This little baby was $1300 with me installing it myself.
> > Prices are what ever the market will bare.
> > Ms Patticake
> > 90PT 40WB Jus Chillin (Mardi Gras Circus Wagon)
> >
>
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 2 Guest(s)