Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Mufflers
05-18-2010, 13:35
Post: #1
Mufflers
Pricing will be available tomorrow Wednesday for 6 inch mufflers in either
Aluminized Steel, 409 Stainless or 304 Stainless
these mufflers will be 51.5 inches long, 6 inch inlet and outlet and 10 inches
in diameter
following shortly will be mandrel bent tubing for series 60 and 8v92
mandrel bent no welds to impair efficiency. These will also be available in
aluminized steel and 409,304 stainless
also available a bellows made of 304 stainless. No more ball and socket
expansion joint.
they will be priced lower than traditional Vendors
The above will available in complete exhaust systems and in separate components

for older Coaches and newer coaches
We are looking at reproducing left and right bank exhaust tubes on the 8v92
Mufflers will available for m380

Stephen 97 bmc 37
dupreeproducts.com
Quote this message in a reply
05-18-2010, 14:07
Post: #2
Mufflers

Stephen,

I'm not sure of all the sizes you mentioned. So, will these fit on an 85 PT40 with the 6V92? I could use a new muffler!

Jerry
85 PT40




Sent via BlackBerry from T-Mobile


From: "cape0001" <sbirtles@...>
Date: Wed, 19 May 2010 01:35:03 -0000
To:
Subject: [WanderlodgeForum] Mufflers



Pricing will be available tomorrow Wednesday for 6 inch mufflers in either Aluminized Steel, 409 Stainless or 304 Stainless

these mufflers will be 51.5 inches long, 6 inch inlet and outlet and 10 inches in diameter

following shortly will be mandrel bent tubing for series 60 and 8v92

mandrel bent no welds to impair efficiency. These will also be available in aluminized steel and 409,304 stainless

also available a bellows made of 304 stainless. No more ball and socket expansion joint.

they will be priced lower than traditional Vendors

The above will available in complete exhaust systems and in separate components



for older Coaches and newer coaches

We are looking at reproducing left and right bank exhaust tubes on the 8v92

Mufflers will available for m380



Stephen 97 bmc 37

dupreeproducts.com



Quote this message in a reply
05-18-2010, 23:37
Post: #3
Mufflers
Stephen, sounds like you guys are really getting into the full service parts for our coaches. Great news!!


Ernie Ekberg
83PT40
Wanderlodge
Weatherford, Tx 817-475-3991

--- On Tue, 5/18/10, cape0001 <sbirtles@...> wrote:

From: cape0001 <sbirtles@...>
Subject: [WanderlodgeForum] Mufflers
To: WanderlodgeForum@yahoogroups.com
Date: Tuesday, May 18, 2010, 8:35 PM


Pricing will be available tomorrow Wednesday for 6 inch mufflers in either Aluminized Steel, 409 Stainless or 304 Stainless
these mufflers will be 51.5 inches long, 6 inch inlet and outlet and 10 inches in diameter
following shortly will be mandrel bent tubing for series 60 and 8v92
mandrel bent no welds to impair efficiency. These will also be available in aluminized steel and 409,304 stainless
also available a bellows made of 304 stainless. No more ball and socket expansion joint.
they will be priced lower than traditional Vendors
The above will available in complete exhaust systems and in separate components

for older Coaches and newer coaches
We are looking at reproducing left and right bank exhaust tubes on the 8v92
Mufflers will available for m380

Stephen 97 bmc 37
dupreeproducts.com

Quote this message in a reply
05-19-2010, 13:12
Post: #4
Mufflers
mufflers
51 inch long 10 inch in diameter 6 inch inlet and outlet
Aluminized steel $273.00
409 Stainless $403.00
304 Stainless $588.00

Lead time 1 week form time of order from manufacturer to me. Then ups time form
me to you
__________________
Have a Great Day


Stephen Birtles
97BMC37

http://www.dupreeproducts.com
Telephone 888 668 4288
or 905 328 0162














--- In WanderlodgeForum@yahoogroups.com, "cape0001" <sbirtles@...> wrote:
>
> Pricing will be available tomorrow Wednesday for 6 inch mufflers in either
Aluminized Steel, 409 Stainless or 304 Stainless
> these mufflers will be 51.5 inches long, 6 inch inlet and outlet and 10 inches
in diameter
> following shortly will be mandrel bent tubing for series 60 and 8v92
> mandrel bent no welds to impair efficiency. These will also be available in
aluminized steel and 409,304 stainless
> also available a bellows made of 304 stainless. No more ball and socket
expansion joint.
> they will be priced lower than traditional Vendors
> The above will available in complete exhaust systems and in separate
components
>
> for older Coaches and newer coaches
> We are looking at reproducing left and right bank exhaust tubes on the 8v92
> Mufflers will available for m380
>
> Stephen 97 bmc 37
> dupreeproducts.com
>
Quote this message in a reply
08-22-2010, 03:57
Post: #5
Mufflers
Stephen,

I also need pricing for a custom muffler for a 6V92TA 330Hp.

Longest life SS
26" body
10 x 15 oval type 2
5" offset in and out
Minimum pressure drop

Tks BC/Ken Doyle
H: 804-725-3132
C: 301-908-5735
ken.hvac-conserve@...



--- In WanderlodgeForum@yahoogroups.com, "cape0001" <sbirtles@...> wrote:
>
> mufflers
> 51 inch long 10 inch in diameter 6 inch inlet and outlet
> Aluminized steel $273.00
> 409 Stainless $403.00
> 304 Stainless $588.00
>
> Lead time 1 week form time of order from manufacturer to me. Then ups time
form me to you
> __________________
> Have a Great Day
>
>
> Stephen Birtles
> 97BMC37
>
> http://www.dupreeproducts.com
> Telephone 888 668 4288
> or 905 328 0162
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> --- In WanderlodgeForum@yahoogroups.com, "cape0001" <sbirtles@> wrote:
> >
> > Pricing will be available tomorrow Wednesday for 6 inch mufflers in either
Aluminized Steel, 409 Stainless or 304 Stainless
> > these mufflers will be 51.5 inches long, 6 inch inlet and outlet and 10
inches in diameter
> > following shortly will be mandrel bent tubing for series 60 and 8v92
> > mandrel bent no welds to impair efficiency. These will also be available in
aluminized steel and 409,304 stainless
> > also available a bellows made of 304 stainless. No more ball and socket
expansion joint.
> > they will be priced lower than traditional Vendors
> > The above will available in complete exhaust systems and in separate
components
> >
> > for older Coaches and newer coaches
> > We are looking at reproducing left and right bank exhaust tubes on the 8v92
> > Mufflers will available for m380
> >
> > Stephen 97 bmc 37
> > dupreeproducts.com
> >
>
Quote this message in a reply
08-22-2010, 12:47
Post: #6
Mufflers
I'd be interested in the reply also.
My PT36 has the 6V92 Silver.

Bob Lawrence
84 PT36
Cushing, Maine

> Stephen,
>
> I also need pricing for a custom muffler for a 6V92TA 330Hp.
>
> Longest life SS
> 26" body
> 10 x 15 oval type 2
> 5" offset in and out
> Minimum pressure drop
>
> Tks BC/Ken Doyle
> H: 804-725-3132
> C: 301-908-5735
> ken.hvac-conserve@...
>
>
>
> --- In WanderlodgeForum@yahoogroups.com, "cape0001" <sbirtles@> wrote:
> >
> > mufflers
> > 51 inch long 10 inch in diameter 6 inch inlet and outlet
> > Aluminized steel $273.00
> > 409 Stainless $403.00
> > 304 Stainless $588.00
> >
> > Lead time 1 week form time of order from manufacturer to me. Then ups time
form me to you
> > __________________
> > Have a Great Day
> >
> >
> > Stephen Birtles
> > 97BMC37
> >
> > http://www.dupreeproducts.com
> > Telephone 888 668 4288
> > or 905 328 0162
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > --- In WanderlodgeForum@yahoogroups.com, "cape0001" <sbirtles@> wrote:
> > >
> > > Pricing will be available tomorrow Wednesday for 6 inch mufflers in either
Aluminized Steel, 409 Stainless or 304 Stainless
> > > these mufflers will be 51.5 inches long, 6 inch inlet and outlet and 10
inches in diameter
> > > following shortly will be mandrel bent tubing for series 60 and 8v92
> > > mandrel bent no welds to impair efficiency. These will also be available
in aluminized steel and 409,304 stainless
> > > also available a bellows made of 304 stainless. No more ball and socket
expansion joint.
> > > they will be priced lower than traditional Vendors
> > > The above will available in complete exhaust systems and in separate
components
> > >
> > > for older Coaches and newer coaches
> > > We are looking at reproducing left and right bank exhaust tubes on the
8v92
> > > Mufflers will available for m380
> > >
> > > Stephen 97 bmc 37
> > > dupreeproducts.com
> > >
> >
>
Quote this message in a reply
08-24-2010, 11:29
Post: #7
Mufflers
Call Auto-jet muffler #800-247-5391.
When the last time I talked to them, a 5" in and out was 185.20.
The 6" was 333.48 plus shipping. These were exact replacment for
the 6v and the 8v. Before they went to roof exhaust.

Steve Gureasko
90WBWL401/2 Jus Chillin
Ponchatoula, La.
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 2 Guest(s)