Measuring converter output?

[Scott Forman]

After doing some reading and some wire chasing, I have determined that
my bus has a dual-output converter (Power Source 9180) with high or low
voltage set via a toggle switch. Unfortunately, though, I do not know
which setting is which on the switch. How do I determine what charge
is being delivered at the batteries at a given time?

Thanks
Scott Forman
82 FC35RB
Memphis

[Jeff Miller]

No idea where that converter came from but, ...
With the batteries fully charged, you should be able to put a voltmeter
across the output of the converter and see which switch position yields
a higher voltage.

- Jeff Miller
in Holland, MI


--- In WanderlodgeForum@yahoogroups.com, "Scott Forman" <sforman@...>
wrote:
>
> After doing some reading and some wire chasing, I have determined
that
> my bus has a dual-output converter (Power Source 9180) with high or
low
> voltage set via a toggle switch. Unfortunately, though, I do not
know
> which setting is which on the switch. How do I determine what charge
> is being delivered at the batteries at a given time?
>
> Thanks
> Scott Forman
> 82 FC35RB
> Memphis
>