Voltage regulator

[K Sarich]

Attached is a pict of the Balmar 614 installed on the firewall and a quick schematic showing the wiring.

Installation was straight forward once we determined which wires in the existing loom provided switched power and which wire was the sense wire. As shown on the included wiring schematic we simply cut those wires at the existing regulator and connected them to the appropriate Balmar wires. We left the original regulator in place as a spare.

Programming the Balmar is a bit archaic given our touch screen world, but is manageable and once programmed to your satisfaction there is no need to re-program.

For more info you can download the 614 manual here:

http://www.balmar.net/pdf/mc-614-manual.pdf