"POOF" From LP Heater

[trvlngnrs]

> We've never used our LP heaters. However, during the next couple
months they will be needed when camped out in the desert. With tank
valve open, do I set the dash switch to LP ON, and set the thermostats
to the desired temp? Something more? I'll attempt to clean them first.


Ha, are you brave! Asking me for help. Here is what I've figured out
so far:

* Propane tank on.
* LP detector on.
* Dash LP switch has to be on to provide 12 volt to the ignitor.
* Each furnace has it's own thermostat, each one of these must be on
(small lever on the bottom).
* Set desired temp.
* Stand outside:-) (I used to work in a burn unit)

Steve Harrie