SMI Silent Partner Brake Control Questions

[Curt Sprenger]

Before I screw something up I have some questions. I'm installing the
SMI Silent Partner brake control in the Bronco/Bird. All the Bronco
stuff is installed.

To check out the towed install, the instructions say the gauge should
read about 12" vacuum, no more than 15". Is there a gauge in the control
box? Do I need to install a gauge in the vacuum line?

The instruction also say to adjust the vacuum in 1/4 turn
increments...location of adjustment screw?

Those who have installed one of these units themselves, is there a gauge
inside of the box along with the adjustment screw? Remove the bottom
plate or remove the cover?

--
Curt Sprenger 1987 PT38, Anaheim Hills, Calif.

[Scott Williams]

Hi Curt,

On mine, the gauge is on the box (with the pump in it) that goes in the car
adjustment is
on box also. Guage shows on top of box, adjustment on end. I put mine under the
front
seat

Mine is the Silent partner model and 3-4 years old.

Help?

Scott Williams
04 Essex
http://www.rvsafetycandle.com
================
--- In WanderlodgeForum@yahoogroups.com, Curt Sprenger wrote:
>
> Before I screw something up I have some questions. I'm installing the
> SMI Silent Partner brake control in the Bronco/Bird. All the Bronco
> stuff is installed.
>
> To check out the towed install, the instructions say the gauge should
> read about 12" vacuum, no more than 15". Is there a gauge in the control
> box? Do I need to install a gauge in the vacuum line?
>
> The instruction also say to adjust the vacuum in 1/4 turn
> increments...location of adjustment screw?
>
> Those who have installed one of these units themselves, is there a gauge
> inside of the box along with the adjustment screw? Remove the bottom
> plate or remove the cover?
>
> --
> Curt Sprenger 1987 PT38, Anaheim Hills, Calif.
>