Front running light mod

[Ralph L. Fullenwider]

Hello everyone:

Some time back there was a thread on someone making or having made a
stainless cover for the front running lights that is located between the
headlights on the 90's Coaches.

I searched but did locate the thread. Where was it made? are they
available? Any help is appreciated.

Safe travels,

Ralph and Charolette Fullenwider
Ralph's RV Solutions, Duncan, Oklahoma

[David Brady]

Hi Ralph,

These guys can definitely make it. They may even have
something is stock:

http://www.summit-products.com/contact.htm

David Brady
'02 LXi, Smokey
Va no more

Ralph L. Fullenwider wrote:
> Hello everyone:
>
> Some time back there was a thread on someone making or having made a
> stainless cover for the front running lights that is located between the
> headlights on the 90's Coaches.
>
> I searched but did locate the thread. Where was it made? are they
> available? Any help is appreciated.
>
> Safe travels,
>
> Ralph and Charolette Fullenwider
> Ralph's RV Solutions, Duncan, Oklahoma
>

[Curt Sprenger]

Ralph,
Greg O'Connor made a SS cover that goes between the head lights on his '94.

Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, Calif.



Ralph L. Fullenwider wrote:

>Hello everyone:
>
>Some time back there was a thread on someone making or having made a
>stainless cover for the front running lights that is located between the
>headlights on the 90's Coaches.
>
>I searched but did locate the thread. Where was it made? are they
>available? Any help is appreciated.
>
>Safe travels,
>
>Ralph and Charolette Fullenwider
>Ralph's RV Solutions, Duncan, Oklahoma
>
>
>
>

[Leroy Eckert]

Ralph:
I fabricated flat stainless for my coach including a plate that surrounds the
headlight and turn signal. I used 20 guage #8 polished stainless. Got the metal
from Phoenix Metals.

Leroy Eckert
1990 WB-40 Smoke N Mirrors
Niceville, FL







----- Original Message -----
From: Ralph L. Fullenwider
To: WanderlodgeForum@yahoogroups.com
Sent: Wednesday, November 15, 2006 11:20 AM
Subject: [WanderlodgeForum] Front running light mod


Hello everyone:

Some time back there was a thread on someone making or having made a
stainless cover for the front running lights that is located between the
headlights on the 90's Coaches.

I searched but did locate the thread. Where was it made? are they
available? Any help is appreciated.

Safe travels,

Ralph and Charolette Fullenwider
Ralph's RV Solutions, Duncan, Oklahoma





[Non-text portions of this message have been removed]

[Ralph L. Fullenwider]

Thanks to all for the info, very much appreciated. With your help, I have
found the solution.

Ralph


At 01:41 PM 11/15/2006 -0500, you wrote:
>Hi Ralph,
>
>These guys can definitely make it. They may even have
>something is stock:
>
>http://www.summit-products.com/contact.htm
>
>David Brady
>'02 LXi, Smokey
>Va no more
>
>Ralph L. Fullenwider wrote:
> > Hello everyone:
> >
> > Some time back there was a thread on someone making or having made a
> > stainless cover for the front running lights that is located between the
> > headlights on the 90's Coaches.
> >
> > I searched but did locate the thread. Where was it made? are they
> > available? Any help is appreciated.
> >
> > Safe travels,
> >
> > Ralph and Charolette Fullenwider
> > Ralph's RV Solutions, Duncan, Oklahoma
> >
>
>
>
>
>Yahoo! Groups Links
>
>
>

Safe travels,

Ralph and Charolette Fullenwider
Ralph's RV Solutions, Duncan, Oklahoma

[Gregory OConnor]

Ralph, I made several out of rem stock I think 6 units cost less than
20.00 to make. Its easy if you have access to a brake. from
headlight to headlight there is a slight radius that can be
duplicated by leaving both fold tabs with material to trim ( aprox 2
inches)drag a plasma torch quick for the first 4-5 and last 4-5
inches but lift the torch during the center cut to heat the dross and
distort the SS with a radius. If you want it closer to chrome
use "everbright" SS I went with the DeLorean look using brushed SS.
I made one of each for a guy we are meeting up with in Quartsite.
GregoryO'Connor
94ptRomolandCa

--- In WanderlodgeForum@yahoogroups.com, "Ralph L. Fullenwider"
wrote:
>
> Thanks to all for the info, very much appreciated. With your help,
I have
> found the solution.
>
> Ralph
>
>
> At 01:41 PM 11/15/2006 -0500, you wrote:
> >Hi Ralph,
> >
> >These guys can definitely make it. They may even have
> >something is stock:
> >
> >http://www.summit-products.com/contact.htm
> >
> >David Brady
> >'02 LXi, Smokey
> >Va no more
> >
> >Ralph L. Fullenwider wrote:
> > > Hello everyone:
> > >
> > > Some time back there was a thread on someone making or having
made a
> > > stainless cover for the front running lights that is located
between the
> > > headlights on the 90's Coaches.
> > >
> > > I searched but did locate the thread. Where was it made? are
they
> > > available? Any help is appreciated.
> > >
> > > Safe travels,
> > >
> > > Ralph and Charolette Fullenwider
> > > Ralph's RV Solutions, Duncan, Oklahoma
> > >
> >
> >
> >
> >
> >Yahoo! Groups Links
> >
> >
> >
>
> Safe travels,
>
> Ralph and Charolette Fullenwider
> Ralph's RV Solutions, Duncan, Oklahoma
>