Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
New replacement Rear camera- 450 and 380?
07-28-2014, 12:02
Post: #1
New replacement Rear camera- 450 and 380?
İmage
Hi,
I have replaced the rear camera on the 450 using the same cable and Panasonic monitor.
The original camera was a MITO ecx 100. A double camera with B/W and colour. It is no longer made.

I spoke with a very helpful rep at Mito corp who suggested using an adapter that they have available with the Mito CM 32
http://mito-oem.com/product.php?id=CM32AH

The adapter requires 4 soldered connections that can be done on a bench. Then a simple plug in.
I mounted the camera behind the glass but the IR caused double reflection so I had to mount it outside, drilling a 5/8 hole in the FG under the old glass. Drill the hole off centre to give the wire some room to allow tipping. The unit comes with a grommet. It was made for metal but it works with touch of adhesive -- unlikely that it would come out anyway.

Cost about $140
Picture of camera installed.
Contact:

Travis Monroe
Technical Service Representative
1-888-433-6486 EXT. 271 (Phone)
(574) 522-5480(Fax)
(574) 970-0082 (Marine Fax Line)
Tmonroe@MITOcorp.com (E-Mail)
MITO Corporation


Attached File(s)
.pdf  EXC100 pictures of camera.pdf (Size: 148.27 KB / Downloads: 887)
.pdf  Camera Adapter Pigtail Model (1) (2).pdf (Size: 21.56 KB / Downloads: 909)

Ross MacKillop
Wiarton Ontario
2006 450 Lxi
Find all posts by this user
Like Post Quote this message in a reply
Post Reply 


Messages In This Thread
New replacement Rear camera- 450 and 380? - dentmac - 07-28-2014 12:02



User(s) browsing this thread: 1 Guest(s)